CSWrite V3.2.4
CSWriterUx V3.2.4 is the latest burning tool software of Core Sea Technology. Support core sea 8bit MCU, 32bit MCU.
Products
Product Overview Favorites
CS32F036
CS32F036 series microcontrollers adopt the high-performance 32-bit ARM® Cortex®- M0 core, embedded with up to 32 KB flash and 4 KB SRAM, with a maximum operating frequency of 48 MHz. The chips have standard communication interfaces (I2C, SPI, and USART), one 12-bit ADC, five 16-bit timers, and one enhanced control PWM timer.
CS32F036 series microcontrollers have an operating temperature range of 85 ℃ to 105 ℃ and an operating voltage range of 2 V to 5.5 V. The chips offer a range of power supply operating modes to meet different low-power applications.
CS32F036 series microcontrollers can be used in a variety of application scenarios, such as smart homes, handheld devices, consumer electronics, industrial measurement, and GPS platforms.
Cores
-32-bit ARM®Cortex®-M0 CPU
-Up to 48 MHz operating frequency
-Up to 48 MHz operating frequency
Memory
-32K KB flash memory
-4 KB SRAM with hardware parity check
-4 KB SRAM with hardware parity check
Clock module
-Internal 8 MHz RC oscillator (HRC), ±1% accuracy in typical cases
-Internal 14 MHz RC oscillator (HRC14) with ±1% accuracy in typical cases
-Internal 40 kHz RC oscillator (LRC), ±10% accuracy in typical cases
-4~32 MHz crystal oscillator (HXT)
-x2, x3,... x16 phase-locked loop (PLL), up to 48 MHz
-Internal 14 MHz RC oscillator (HRC14) with ±1% accuracy in typical cases
-Internal 40 kHz RC oscillator (LRC), ±10% accuracy in typical cases
-4~32 MHz crystal oscillator (HXT)
-x2, x3,... x16 phase-locked loop (PLL), up to 48 MHz
Operating Environment
-VDD voltage: 2.0~5.5 V
-VDDA voltage: 2.0~5.5 V /
-Temperature range:-40~105 ℃
-VDDA voltage: 2.0~5.5 V /
-Temperature range:-40~105 ℃
Boot method
-Supports boot from flash memory
-Supports boot from system memory
-Supports booting from internal SRAM
-Supports boot from system memory
-Supports booting from internal SRAM
Power Management
-Low power consumption modes: sleep, deep sleep 1, deep sleep 2 and power down mode
-Supports power-on/power-off reset (POR/PDR)
-Supports Low Voltage Detection (LVD)
-Supports power-on/power-off reset (POR/PDR)
-Supports Low Voltage Detection (LVD)
General purpose input/output (I/O)
-27 I/Os supports up to 48 MHz operating frequency
-All I/Os map external interrupt vectors
-All I/Os map external interrupt vectors
Analog-to-digital converter (ADC)
-1 channel 12-bit ADC
-Up to 1us conversion time
-Supports 10 external input channels
-Operating voltage range: 2.4 ~5.5 V
-Input voltage conversion range: 0~VDDA
-Up to 1us conversion time
-Supports 10 external input channels
-Operating voltage range: 2.4 ~5.5 V
-Input voltage conversion range: 0~VDDA
Timer
-1 16-bit advanced control timer (TIM1) with 6 channels of PWM output with deadband control each.
-4 general-purpose 16-bit timers
-1 independent watchdog timer (FWDT): 8-bit preset number and 12-bit auto-decrement counter
-1-channel watchdog timer (WWDT): 7-bit auto-decrement counter
1 system time timer: 24-bit auto-decrement counter
-4 general-purpose 16-bit timers
-1 independent watchdog timer (FWDT): 8-bit preset number and 12-bit auto-decrement counter
-1-channel watchdog timer (WWDT): 7-bit auto-decrement counter
1 system time timer: 24-bit auto-decrement counter
DMA
-5-channel DMA controller
-Supported peripherals: SPIx, I2Cx, USARTx, TIMx, ADC
-Supported peripherals: SPIx, I2Cx, USARTx, TIMx, ADC
Interrupts and events
-Up to 32 individually maskable interrupt channels
-4 priority levels selectable
-16 external interrupt lines
-4 priority levels selectable
-16 external interrupt lines
Serial Peripheral Interface (SPI)
-1 SPI interface
-3-bit prescaler can generate 8 master mode frequencies
-4 to 16-bit configurable frame formats
-3-bit prescaler can generate 8 master mode frequencies
-4 to 16-bit configurable frame formats
Universal Synchronous/Asynchronous Transceiver (USART)
-2 USART
-Automatic baud rate detection
-Supports wake-up from deep sleep 1/deep sleep 2 mode
-Automatic baud rate detection
-Supports wake-up from deep sleep 1/deep sleep 2 mode
I2C
-One I2C supports master/slave mode
-Support: standard mode (100k bit/s), fast mode (up to 400k bit/s)
-Supports 7-bit or 10 bit addressing mode
-CRC generator/verifier
-Serial single line debugging (SWD)
-Support: standard mode (100k bit/s), fast mode (up to 400k bit/s)
-Supports 7-bit or 10 bit addressing mode
-CRC generator/verifier
-Serial single line debugging (SWD)
Package
—TSSOP20
Read more
Stow
Model Catalog
Compare
Export
Full screen
Technical Documentation
Product manual(2)
Application Document(13)
AN：基于芯海CS32F03x UART外設軟件模拟LIN從機與LIN總線通信
edition：V1.0
CS32F0XX ADC外設模塊應用筆記
edition：V1.0
CS32F0XX TIMER外設模塊應用筆記
edition：V1.0
CS32F03X FAQ
edition：V1.1
CS32F03X 低功耗 Deepsleep 應用配置
edition：V1.0
CS32F03X 锂電池供電場景下估算 VDDA 電壓
edition：V1.0
CS32F03X 生成多路PWM控制無刷電機換相
edition：V1.0
應用筆記： CS32F03x IAP 升級
edition：V1.0
應用筆記：CS32F03x 設計注意事項
edition：V1.0
應用筆記：芯海通用MCU IAR8開發指南
edition：V1.0
應用筆記：芯海通用MCU MDK開發指南
edition：V1.0
應用筆記：芯海通用MCU USART自動波特率檢測
edition：V1.0
應用筆記：芯海通用MCUflash讀寫保護和SWD複用指導手冊
edition：V1.0
Evaluation and development data(2)
Design and development
Tools/Software
_1667972453.jpg)
_1667966589.jpg)
CSU-IDE
Core sea 8-bit MCU/SOC integrated development environment
1. Integrated C compiler, assembler, linker, window
2. Support standard C language and assembly language development 3 Example code of integrated chips